Description
1 x Girl and Horse in Field Logo Vinyl Decal Sticker
Suitable for DIY Home Sign, Box Frame, Walls, Mirrors, Doors, Laptops, Car, Windows, Tablets, Helmets, Bikes, Lockers…
Sizes Available
Small Approx Size: 10cm high x 10cm wide
Medium Approx Size: 15cm high x 15cm wide
Large Approx Size: 20cm high x 20cm wide
X Large Approx Size: 30cm high x 30cm wide
XX Large Approx Size: 40cm high x 40cm wide
XXX Large Approx Size: 50cm high x 50cm wide
XXXX Large Approx Size: 58cm high x 58cm wide
Available colours:
Black, White, Mid Grey, Anthracite, Gold, Silver, Hot Pink, Purple, Sky Blue, Green, Bright Yellow, Bright Red, Orange, Cream, Forest Green, Traffic Blue, Burgundy, Dove Grey, Wine Red
(If you would like the image reversed please leave a ‘reverse’ note and we will swap it for you)
This is a one colour Gloss Vinyl Sticker with no background supplied with clear application tape.
Can be applied to any smooth, non-porous surface.
Vinyl Decals come in 3 pieces:
1. Transparent transfer tape top layer.
(Holds your decal or sticker together until it is applied)
2. Middle layer is your actual vinyl decal or sticker
(sandwiched between the Application Tape and the Wax Backing)
3. Bottom layer is the paper backing.
(protects the adhesive until the decal is ready to be applied)
APPLICATION TIPS:
1. Do not apply on extreme cold or hot surfaces. Ideal temperature between 15°C & 30°C.
2. Do not touch the adhesive backing, oils from your skin will prevent sticking.
3. Before applying decal make sure there is no wax or oily products on the surface
APPLICATION INSTRUCTIONS:
1. Rub the sticker, paying close attention to edges to ensure the transfer tape is properly adhered to the sticker.
2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.
3. Remove the paper backing slowly making sure the sticker stays adhered to the transparent transfer tape.
4. Carefully position the sticker to the desired area, apply with a smooth motion from one edge to the other
5. Rub the sticker from one side to the other, eliminating any air bubbles. Use an object like a credit card to make sure the entire sticker is fully adhered to the surface.
6. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
7. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.
Reviews
There are no reviews yet.