Description
1 x Sheet of 35 Checkmark Tick Logo’s Vinyl Decal Sticker
Suitable for DIY Home Sign, Box Frame, Walls, Mirrors, Doors, Laptops, Car, Windows, Tablets, Helmets, Bikes, Lockers…
Each sticker is approximately: 2.5cm High x 2.5cm Wide
Available colours:
Black, White, Mid Grey, Anthracite, Gold, Silver, Hot Pink, Purple, Sky Blue, Green, Bright Yellow, Bright Red, Orange, Cream, Forest Green, Traffic Blue, Burgundy, Dove Grey, Wine Red
(If you would like the images reversed please leave a ‘reverse’ note and we will swap it for you)
This is a one colour Gloss Vinyl Sticker with no background supplied with clear application tape.
Can be applied to any smooth, non-porous surface.
Vinyl Decals come in 3 pieces:
1. Transparent transfer tape top layer.
(Holds your decal or sticker together until it is applied)
2. Middle layer is your actual vinyl decal or sticker
(sandwiched between the Application Tape and the Wax Backing)
3. Bottom layer is the paper backing.
(protects the adhesive until the decal is ready to be applied)
APPLICATION TIPS:
1. Do not apply on extreme cold or hot surfaces. Ideal temperature between 15°C & 30°C.
2. Do not touch the adhesive backing, oils from your skin will prevent sticking.
3. Before applying decal make sure there is no wax or oily products on the surface
APPLICATION INSTRUCTIONS:
1. Rub the sticker, paying close attention to edges to ensure the transfer tape is properly adhered to the sticker.
2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.
3. Remove the paper backing slowly making sure the sticker stays adhered to the transparent transfer tape.
4. Carefully position the sticker to the desired area, apply with a smooth motion from one edge to the other
5. Rub the sticker from one side to the other, eliminating any air bubbles. Use an object like a credit card to make sure the entire sticker is fully adhered to the surface.
6. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
7. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.
Reviews
There are no reviews yet.